From pharmaceutical cryogenic equipment to liquid chromatography columns our range of stainless steels provides the essential properties of corrosion resistance, mechanical properties and surface smoothness.
From extrusion to cold pilgering to cold drawing our complete ownership of the production route ensures full control and reproducibility of properties.
Our global production units enable us to optimise production routes in combination with providing our customers with global service.
Instrumentation Tubes
| PRODUCT: TUBES | ||
|---|---|---|
| OD range | mm | Inch |
| min | 3.175 | 0.125 |
| max | 50.8 | 2.0 |
| WT range | mm | Inch |
| min | 0.71 | 0.028 |
| max | 4.77 | 0.188 |
Austenitic Stainless
| DMV designation | Attribute | Nearest equivalent standard | Typical chemical composition 1) | Density | Min. mechanical prop. at RT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS | EN | JIS | Cmax | Cr | Ni | Mo | Cu | others | Rp0.2 Yield Strength | Rm Tensile Strength | ||||||
| g/cm3 | lb/in3 | MPa | ksi | MPa | ksi | |||||||||||
| DMV 304L | Corrosion Resistant | S30403 | 1.4306 | SUS 304L | 0.03 | 19.0 | 11.0 | 7.9 | 0.29 | 170 | 25 | 485 | 70 | |||
| DMV 304LN | Corrosion Resistant | S30453 | 1.4311 | 0.03 | 18.0 | 10.0 | 7.9 | 0.29 | 205 | 30 | 515 | 75 | ||||
| DMV 316L | Corrosion Resistant | S31603 | 1.4404 | 0.03 | 17.0 | 12.0 | 2.25 | 8.0 | 0.29 | 170 | 25 | 485 | 70 | |||
| DMV 316LN | Corrosion Resistant | S31653 | 1.4429 | 0.03 | 17.0 | 12.5 | 2.75 | 0.12 < N < 0.22 | 8.0 | 0.29 | 205 | 30 | 515 | 75 | ||
| DMV 316LVM | Corrosion Resistant | S31673 | 1.4441 | 0.025 | 17.5 | 14.0 | 2.8 | <0.10 | N<0.10 | 8.0 | 0.29 | 190 | 28 | 490 | 71 | |
1) All figures in weight percentage. In case of order, the limits of the order specification will apply.
Austenitic Ferritic
| DMV designation | Nearest equivalent standard | Typical chemical composition 1) | Density | Min. mechanical prop. at RT | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS | EN | Cmax | Cr | Ni | Mo | Cu | others | Rp0.2 Yield Strength | Rm Tensile Strength | |||||
| g/cm3 | lb/in3 | MPa | ksi | MPa | ksi | |||||||||
| DMV 18.5 | S31500 | 1.4424 | 0.03 | 18.5 | 4.8 | 2.7 | Si 1.7; N 0.1 | 7.8 | 0.28 | 440 | 64 | 630 | 92 | |
| DMV 22.5 | S31803 | 1.4462 | 0.03 | 22.0 | 5.5 | 3.0 | N 0.17 2) | 7.8 | 0.28 | 450 | 65 | 620 | 90 | |
| DMV 25.7 | S31260 | 0.03 | 25.0 | 6.5 | 3.0 | 0.5 | N 0.20; W 0.5 | 7.8 | 0.28 | 450 | 65 | 690 | 100 | |
| DMV 25.7Cu | S32550 | 1.4507 | 0.03 | 25.0 | 7.0 | 3.5 | 1.5 | N 0.22 2) | 7.8 | 0.28 | 550 | 80 | 760 | 110 |
| DMV 25.7N | S32760 | 1.4501 | 0.03 | 25.0 | 7.0 | 4.0 | 0.5 | N 0.25; W 0.5 2) | 7.8 | 0.28 | 550 | 80 | 750 | 109 |
1) All figures in weight percentage. In case of order, the limits of the order specification will apply.
2) Min PRE value controlled.
Nickel and Nickel Based Alloys
| DMV designation | Attribute | Nearest equivalent standard | Typical chemical composition 1) | Density | Min. mechanical prop. at RT | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS | EN | Cmax | Cr | Ni | Mo | Cu | others | Rp0.2 Yield Strength | Rm Tensile Strength | ||||||
| g/cm3 | lb/in3 | MPa | ksi | MPa | ksi | ||||||||||
| DMV 200 | Pure Nickel | N02200 | 2.4066 | 0.05 | 99.4 | 8.9 | 0.32 | 103 | 15 | 379 | 55 | ||||
| DMV 201 | Pure Nickel | N02201 | 2.4068 | 0.02 | 99.4 | 8.9 | 0.32 | 83 | 12 | 345 | 50 | ||||
| DMV 400 | Nickel-Copper | N04400 | 2.4360 | 0.15 | 65.0 | 30.0 | Fe 2; Mn 1.5 | 8.8 | 0.32 | 180 | 26 | 450 | 65 | ||
| DMV 8020 | Corrosion Resistant | N08020 | 2.4660 | 0.02 | 20.0 | 34.0 | 2.5 | 3.5 | Nb + Ta | 8.1 | 0.29 | 240 | 35 | 550 | 80 |
| DMV 928 | Corrosion Resistant | N08028 | 1.4563 | 0.02 | 27.0 | 31.0 | 3.5 | 1.2 | N 0.10 | 8.0 | 0.29 | 210 | 31 | 500 | 73 |
| DMV 931 | Corrosion Resistant | N08031 | 1.4562 | 0.015 | 27.0 | 31.0 | 6.5 | 1.2 | N 0.20 | 8.1 | 0.29 | 280 | 41 | 650 | 94 |
| DMV 4692 | Corrosion Resistant | N08034 | 2.4692 | 0.01 | 27.0 | 35.0 | 6.5 | 1.5 | N 0.20 | 8.1 | 0.29 | 310 | 45 | 750 | 108 |
| DMV 800L | Corrosion Resistant | (N08800) | 1.4558 | 0.025 | 21.0 | 32.0 | Ti 0.30; Al 0.30 | 8.0 | 0.29 | 180 | 26 | 450 | 65 | ||
| DMV 800 | Corrosion Resistant | N08800 | 1.4876 | 0.08 | 21.0 | 32.0 | Ti < 0.40 | 8.0 | 0.29 | 210 | 31 | 500 | 73 | ||
| DMV 825 | Corrosion Resistant | N08825 | 2.4858 | 0.03 | 22.0 | 42.0 | 3.0 | 2.0 | Ti 0.80; Al 0.10 | 8.1 | 0.29 | 180 | 26 | 530 | 75 |
| DMV 600L | Corrosion Resistant | N06600 | 2.4817 | 0.025 | 16.0 | 76.0 | Fe 8 | 8.4 | 0.30 | 180 | 26 | 550 | 80 | ||
| DMV 690 | Corrosion Resistant | N06690 | 2.4642 | 0.02 | 29.0 | 60.0 | Fe 9 | 8.2 | 0.29 | 205 | 30 | 585 | 85 | ||
| DMV 625 | Corrosion Resistant | N06625 Gr.1 | 2.4856 | 0.025 | 22.0 | 63.0 | 9.0 | Nb 3.5 | 8.5 | 0.31 | 414 | 60 | 827 | 120 | |
| DMV G3 | Corrosion Resistant | N06985 | 2.4619 | 0.015 | 22.0 | 48.0 | 7.0 | 2.0 | Co;W | 8.3 | 0.30 | 205 | 30 | 585 | 85 |
| DMV C22 | Corrosion Resistant | N06022 | 2.4602 | 0.01 | 22.0 | 57.0 | 13.0 | W | 8.7 | 0.31 | 310 | 45 | 690 | 100 | |
| DMV 59 | Corrosion Resistant | N06059 | 2.4605 | 0.01 | 23.0 | 59.0 | 16.0 | Al | 8.6 | 0.31 | 340 | 50 | 690 | 100 | |
| DMV C4 | Corrosion Resistant | N06455 | 2.4610 | 0.01 | 16.0 | 66.0 | 16.0 | Ti | 8.6 | 0.31 | 280 | 41 | 700 | 102 | |
| DMV C276 | Corrosion Resistant | N10276 | 2.4819 | 0.01 | 16.0 | 57.0 | 16.0 | W | 8.4 | 0.30 | 350 | 51 | 750 | 109 | |
| DMV 800H | Heat Resistant | N08810 | 1.4958 | 0.10 2) | 21.0 | 32.0 | (Al.Ti) 0.15 - 0.60 | 8.0 | 0.29 | 170 | 25 | 500 | 73 | ||
| DMV 811 | Heat Resistant | N08811 | 1.4959 | 0.10 2) | 21.0 | 32.0 | 0.85 < Ti + Al < 1.20 | 8.0 | 0.29 | 170 | 25 | 500 | 73 | ||
| DMV AC66 | Heat Resistant | S33224 | 1.4877 | 0.06 | 27.0 | 32.0 | Ce 0.07; Nb 0.8 | 8.0 | 0.29 | 185 | 27 | 500 | 73 | ||
| DMV 600H | Heat Resistant | N06600 | 2.4816 | 0.07 | 16.0 | 76.0 | Fe 8 | 8.4 | 0.30 | 240 | 35 | 550 | 80 | ||
| DMV 625 | Heat Resistant | N06625 Gr.2 | 2.4856 | 0.025 | 22.0 | 63.0 | 9.0 | Nb 3.5 | 8.4 | 0.30 | 276 | 40 | 690 | 100 | |
| DMV 601 | Heat Resistant | N06601 | 2.4851 | 0.08 | 23.0 | 62.0 | Al 1.2; Ti 0.3 | 8.1 | 0.29 | 240 | 35 | 600 | 87 | ||
| DMV 617 | Heat Resistant | N06617 | 2.4663 | 0.08 | 22.0 | 55.0 | 9.0 | Co 12; Al; Ti | 8.4 | 0.30 | 300 | 44 | 700 | 102 | |
| DMV C263 | Heat Resistant | N07263 | 2.4650 | 0.08 | 20.0 | 52.0 | 5.8 | Co 20;Ti 2.1;Al 0.5,Mn <0.6 | 8.4 | 0.3 | 585 | 118 | 1004 | 145 | |
1) All figures in weight percentage. In case of order, the limits of the order specification will apply.
2) Minimum level of carbon content is mandatory.
